Browse Categories

WHY MANIFOLDS ARE SAVING THE DAY FOR ENGINEERS

manifolds

For over a century, engineers have struggled to find an efficient way to secure impulse lines to manifolds without allowing for any leaks. The first manifolds used NPT taper threads for tube connections, which are still being used today, however, much better tube technologies are accessible.

In a recent blog post, Parker introduces the PTFree connect system, which is a simple method that connects impulse lines to manifolds without involving the use of taper threads, PTFE tape or a thread sealant. The system is available on all types of manifold.

The thread on the male adaptor is screwed into the manifold and uses the same type of stainless steel sealing washer as the valve heads, providing high-pressure leakproof and bubble-tight connection. The adaptor is then secured by a locking plate mechanism.

In addition to the PTFree system, Parker developed inverted A-LOK fittings, which connect impulse lines directly to manifolds, eliminating taper threads, the need for PTFE tape or sealant, and adaptors. While the fittings still require cautious installation, the key advantage is that the tube is not twisted during installation.

Parker is confident that their latest technology will offer the best solution to manifold connector leaks.

Want to learn more about Parker’s manifold connector technology?

Give us a call at 1.800.333.7519 or contact us online to speak with an ACI representative today.

Posts

Elevating Customer Experience in Industrial Process Control Distribution: Top Expectations for Distributors [03/04/24 01:59 PM] The Advantages of Partnering with ACI Controls as your Industrial Products Stocking Distributor [03/04/24 01:37 PM] The Value of Continued Process Application and Skill Set Training for Manufacturing Maintenance Departments [03/04/24 01:26 PM] Navigating the Complexities of Burner Control Management in Furnace Processes [03/04/24 12:50 PM] 10 Advantages of Using Variable Frequency Drives (VFDs) [03/04/24 12:35 PM] Navigating Process Filtration Products in the Food and Beverage Industry: Requirements and Challenges [03/04/24 12:26 PM] The Top 10 Benefits of On-Site Nitrogen Generators for Manufacturing Processes [03/04/24 12:10 PM] Pipe Heat Tracing [03/04/24 10:38 AM] Improving Manufacturing Efficiency: A Guide to Process Control [03/01/24 10:48 AM]

Unleashing The Power Of Data Acquisition Systems In Manufacturing [01/16/24 11:43 AM]

Protecting Your Investment: The Critical Role of Balston Air and Gas Filters in Industrial Equipment [12/07/23 09:52 AM] Cleaner, Smarter and More Efficient Filtration Solutions [12/03/23 10:42 PM] Combustion Air Blowers [12/01/23 10:23 PM]

Supplier Spotlight: Honeywell [11/15/23 10:12 PM]

Prioritization and Criticality in Manufacturing: What it Means to You [08/28/23 11:37 AM] Chart Recorders: What Are They and How Can They Help You Collect Accurate Data [08/15/23 11:19 AM]

Everything You Need to Know About Fuel Water Separators (and Why Maintenance is Critical) [06/20/23 03:12 PM] The Differential Pressure Guide: The Basics You Need to Know [06/15/23 02:43 PM]

What is Predictive and Preventive Maintenance and Why You Should Care [05/30/23 03:00 PM]

Liquid Nitrogen Generators: What Are They and How Do They Work? [04/15/23 03:19 PM]

What You Need to Know About Industrial Burners [03/21/23 12:17 PM] Differential Pressure Switches: What You Need To Know [03/01/23 09:10 PM] Buyer's Guide: What to Know Before Buying Temperature Transmitters [03/01/23 09:01 PM]

PLCs in Manufacturing [01/18/23 05:11 PM] Why Choose Single Ferrule Tube Fittings for Vibration Protection and Temp Cycling [01/11/23 01:10 PM] HMIs: What Are They and How to Use Them [01/11/23 10:10 AM]

Buyers’ Guide: What to Know About Buying Compressed Air Dryers [11/10/22 04:33 PM]

HOW TO STAY SAFE IN INDUSTRIAL HEATING APPLICATIONS [09/30/21 03:47 PM] 3 WAYS THAT PPE WILL KEEP YOU SAFE IN THE WORKPLACE [09/28/21 03:35 PM] HOW TO PREVENT CORROSION IN OIL AND GAS APPLICATIONS [09/28/21 01:29 PM]

HOW TO IMPROVE INDOOR AIR QUALITY IN YOUR FACILITY [08/20/21 11:15 AM] EVERYTHING YOU NEED TO KNOW ABOUT SINGLE FERRULE TUBE FITTINGS [08/19/21 04:05 PM] THE IMPORTANCE OF PARKER’S SUPARCASE FERRULE HARDENING [08/12/21 02:57 PM]

THE 4 MOST IMPORTANT SOURCES OF COMPRESSED AIR CONTAMINATION [07/07/20 03:53 PM]

THE EIGHT WASTES OF LEAN MANUFACTURING AND HOW TO TACKLE THEM [06/04/20 03:53 PM]

WHAT YOU NEED TO KNOW ABOUT FILTRATION IN THE FOOD AND BEVERAGE INDUSTRY [05/19/20 04:01 PM] WHAT YOU NEED TO KNOW WHEN SELECTING THE RIGHT INSTRUMENTATION TUBING [05/04/20 04:13 PM]

EVERYTHING YOU NEED TO KNOW ABOUT THE HEAT TREATING PROCESS [04/17/20 04:37 PM] THE IMPORTANCE OF CONDITION MONITORING IN THE FOOD INDUSTRY [04/09/20 04:40 PM]

WHY SUSTAINABLE TECHNOLOGY IS SO IMPORTANT IN THE POWER INDUSTRY [03/18/20 04:48 PM] THE MOST CORROSION-RESISTANT METALS FOR YOUR EQUIPMENT [03/02/20 04:53 PM] HOW TO BOOST STEAM GENERATION EFFICIENCY WITH GUIDED WAVE RADAR [03/02/20 04:52 PM]

HOW TO KEEP YOUR DUST COLLECTOR OPERATING AT ITS HIGHEST CAPACITY [02/04/20 05:00 PM]

THE TOP 5 TRENDS THAT WILL TAKE OVER THE INDUSTRY THIS YEAR [01/31/20 05:35 PM] HOW TO CHOOSE THE BEST CONNECTION TYPE IN SINGLE-USE SYSTEMS [01/03/20 05:39 PM]

BACK TO THE BASICS: 5 IMPORTANT CLASSIFICATIONS OF COMBUSTION [12/16/19 05:45 PM] HOW TO AVOID TURBINE FAILURES IN LNG PROCESSING PLANTS [12/02/19 05:49 PM]

THE MOST COMMON TYPES OF CORROSION AND HOW TO HANDLE IT [11/18/19 05:55 PM]

HOW TO REDUCE DUST COLLECTOR MAINTENANCE IN THE CEMENT INDUSTRY [10/28/19 06:00 PM] 3 REASONS WHY INDUSTRIAL FURNACES ARE THE RIGHT SOLUTION [10/02/19 06:11 PM] HOW TO INCREASE PLANT EFFICIENCY WITH ENERGY MANAGEMENT [10/01/19 06:14 PM]

4 THINGS YOU NEED TO KNOW ABOUT MAXON VALVES IN COMBUSTION SYSTEMS [09/16/19 12:10 PM] THE TOP 5 WAYS TO OPTIMIZE WATER MONITORING [09/03/19 12:16 PM]

HOW TO AVOID CORROSION IN METAL PARTS [08/19/19 12:33 PM] SAVE ENERGY AND PREVENT DISRUPTIONS WITH NITROGEN GENERATORS [08/05/19 12:39 PM]

THIS IS HOW STERILE FILTRATION IS CHANGING THE INDUSTRY [07/23/19 03:41 PM] HOW TO KEEP YOUR ELECTRICAL CABINETS DRY IN THE FOOD INDUSTRY [07/08/19 03:45 PM]

EVERYTHING YOU NEED TO KNOW ABOUT VALVES IN THE FOOD INDUSTRY [06/17/19 03:50 PM]

HOW TO CHOOSE A WATER TREATMENT SYSTEM SUPPLIER FOR POWER GENERATION [05/30/19 03:53 PM] CASE STUDY: HOW TO SOLVE TEMPERATURE CONTROL ISSUES IN A THERMAL OXIDIZER [05/13/19 04:02 PM]

A NEW ENERGY EFFICIENT NITROGEN GENERATOR IS LAUNCHING [04/29/19 04:10 PM] 3 DIGITIZATION TRENDS TO LOOK OUT FOR IN THE OIL AND GAS INDUSTRY [04/09/19 04:11 PM] THE IMPORTANT KEY TO SUCCESSFUL NEW IOT TECHNOLOGY [04/01/19 04:16 PM]

ALL THE BENEFITS OF ACI’S NEW INSTRUMENT GAS SUPPLY COLUMN [03/19/19 01:57 PM]

WHY FILTRATION IS SO IMPORTANT IN THE OIL AND GAS INDUSTRY [02/26/19 02:03 PM] WHY CHECK VALVES ARE SO IMPORTANT FOR HYDRAULICS [02/13/19 02:04 PM] 3 REASONS WHY SUSTAINABILITY IS IMPORTANT FOR MANUFACTURING [02/04/19 02:08 PM]

ALL OF THE HIDDEN COSTS OF GAS CYLINDERS [01/14/19 10:25 PM] THE TOP MANUFACTURING TRENDS TO WATCH OUT FOR IN 2019 [01/02/19 02:22 PM]

HOW TO BE SAFE WHEN WORKING WITH COMPRESSED NITROGEN GAS [12/17/18 02:25 PM] WHY CALIBRATION IS IMPORTANT FOR MANUFACTURERS [12/05/18 02:28 PM]

IS STAINLESS STEEL WORTH THE RISK IN FILTRATION? [11/20/18 02:38 PM] THE BEST TIPS FOR EXTENDING YOUR EQUIPMENT’S LIFESPAN [11/06/18 02:40 PM]

WHY STERILE FILTRATION IS BETTER FOR ULTIMATE SUSTAINABILITY [10/15/18 02:43 PM] 3 TRENDS IN THE OIL AND GAS INDUSTRY TO WATCH OUT FOR [10/03/18 02:46 PM]

MAKE THE BEST SAFETY PLAN FOR COMPRESSED GAS [09/17/18 02:50 PM] EVERYTHING YOU NEED TO KNOW ABOUT THE INTEGRATION OF CONTROL SYSTEMS [09/06/18 02:56 PM]

EVERYTHING YOU NEED TO KNOW ABOUT HEAT TRACING [08/14/18 03:00 PM] THE IMPORTANCE OF WATER CHILLING IN MANUFACTURING [08/02/18 03:00 PM]

ALL OF THE BENEFITS SURROUNDING COMPRESSED AIR FILTERS [07/16/18 03:09 PM] WHY MANIFOLDS ARE SAVING THE DAY FOR ENGINEERS [07/05/18 03:13 PM]

THE IMPACT OF ROBOTIC TECHNOLOGY IN THE MANUFACTURING INDUSTRY [06/22/18 03:18 PM] HOW TO ENSURE SAFER BOTTLED WATER WITH MICROFILTRATION [06/07/18 03:23 PM]

HOW TO BOOST COST-EFFECTIVENESS IN MANUFACTURING [05/24/18 03:31 PM] HOW TO REDUCE LEAD FOUND IN ANIMAL WATERING SYSTEMS [05/11/18 03:34 PM]

4 WAYS TO IMPROVE YOUR MANUFACTURING EMPLOYEES’ HEALTH [04/24/18 03:40 PM] WHY CONDITION MONITORING IS IMPORTANT FOR YOUR BUSINESS [04/10/18 03:43 PM] HOW TO IMPROVE PRODUCTIVITY IN MANUFACTURING [04/04/18 03:53 PM]

HOW TO USE PARKER’S THM ANALYZER TO IMPROVE DRINKING WATER SAFETY [03/30/18 03:56 PM]

5 MANUFACTURING APPS GUARANTEED TO IMPROVE YOUR PROCESSES [02/28/18 04:01 PM] HOW TO CHOOSE THE RIGHT CONNECTOR AND TUBING FOR YOUR APPLICATION [02/08/18 04:06 PM]

4 POWERFUL MANUFACTURING SAFETY TIPS EVERY PLANT NEEDS [01/30/18 09:48 PM] HOW TO PICK COMPRESSED AIR TREATMENT SOLUTIONS [01/24/18 09:49 PM]

TEN STEPS TO LEAK-FREE CONNECTIONS IN OIL AND GAS APPLICATIONS [12/15/17 09:56 PM] EVERYTHING YOU WANT TO KNOW ABOUT THERMAL MASS FLOW [12/14/17 09:53 PM]

HAVE YOU HEARD? ALL INLINE BALL VALVES ARE CERTIFIED TO NSF/ANSI 61 [11/16/17 10:02 PM] WHAT YOU NEED TO KNOW ABOUT BACK PRESSURE SAFETY VALVES [11/09/17 10:08 PM]

HOW TO STREAMLINE YOUR CONDITION MONITORING PROCESS [10/27/17 10:11 PM] HOW TO MIX MATERIALS IN CORROSIVE ENVIRONMENTS [10/13/17 10:15 PM]

5 BIG REASONS TO SWITCH TO OPTICAL DO MEASUREMENT [09/27/17 10:23 PM] HOW TO USE NITROGEN GENERATORS FOR FOOD PRESERVATION [09/14/17 10:27 PM]

3 IMPORTANT REASONS TO USE SMARTLINE TRANSMITTERS [08/24/17 10:33 PM] WHAT YOU NEED TO KNOW ABOUT DOWNSTREAM OIL AND GAS FILTRATION [08/09/17 10:39 PM]

4 BIG BENEFITS OF PROCESS CONTROL INSTRUMENTATION [07/25/17 10:47 PM] THE COMPLETE GUIDE TO THE BEST PROCESS CONTROL PRACTICES [07/06/17 10:47 PM]

5 THINGS YOU NEED TO KNOW ABOUT THE PROCESS CONTROL INDUSTRY [06/22/17 10:50 PM] HOW TO AVOID RISK OF IGNITION WHEN OXYGEN IS PRESENT IN VALVE APPLICATIONS [06/15/17 10:55 PM]

Return to main blog page

RSS